Model 610s

Accessories

• Motor options: 220/240 VAC 1-phase; 460 and 575 VAC 3-phase
• Curved profile type C-187 for doors up to 15'4" wide also available in: 20, 18-gauge galvanized steel; 22, 20-gauge stainless steel; 18-gauge (0.044") aluminum
• Curved profile type C-275 for doors up to 20' wide also available in: 20, 18-gauge galvanized steel; 22, 20-gauge stainless steel; 16-gauge (.050") aluminum
• Flat profile type F-265 for doors up to 20' wide available in: 22, 20, 18-gauge galvanized steel, 22, 20-gauge stainless steel; 16-gauge (.050") aluminum
• Bottom bar also available in galvanized steel, stainless steel and aluminum
• Guide options include galvanized steel, power coated steel
• Hood available in powder coat, stainless steel and aluminum; sloped hood also available
• Brackets also available in powder coat, galvanized steel
• IP65 (NEMA 4/4X equivalent) control panel
• Sensing edge for improved safety
• Additional set of photoelectric sensors
• Optional push buttons, loop detectors, radio control, motion detectors or any combination thereof available for door operation/control
• PowderGuard® Premium powder coat and PowderGuard® Max hardened powder coat available in approximately 200 colors as well as color-matching to specification
• PowderGuard® Textured Finish: Industrial textured powder coat provides a thicker, more scratch resistant coat for added product protection on guides, bottom bar and head plate
• Fenestrated slats feature 3"x 5/8" (C-275 or F-265 slats) or 10"x 1" (F-265 slat) uniformly spaced openings. The fenestrations can be open or with acrylic vision lites
• For ventilated/perforated service doors, provide slats with 1/16" (16 mm) diameter perforations 3/32" (2.4 mm) on center staggered rows (18-gauge C-275) (18-gauge F-265)

‍

Actual door color may vary from the digital representation shown here.

Color samples are available by request.

Powder Coat Color Options

PowderGuard® Premium powder coat options are available in approximately 200 colors as well as custom matching to specification. PowderGuard®Textured Finish: Industrial textured powder coat available in 11 colors provides a thicker, more scratch resistant coat for added product protection on guides, bottom bar and head plate.

STANDARD MAX WIDTH:

up to 20' (6096 mm) depending on gauge and slat type

STANDARD MAX HEIGHT:

up to 20' (6096 mm) depending on gauge and slat type

MOUNTING:

Interior or exterior face of wall

CURTAIN FINISH:

Gray, Tan, White or Brown polyester top coat

CONTROL PANEL:

Electronic controller with microprocessor self-diagnostics. Digital readout indicates door action, alarm conditions, and fault conditions. Time delay self-close timer and non-resettable cycle counter is included. One open/close/stop push button station integrated in control panel. Enclosure is IP54 rated (NEMA 3 equivalent).

CURTAIN:

Interlocking roll-formed slats, end locks attached to prevent lateral movement; Curved profile type C-187 for doors up to 15'4" wide – 22-gauge galvanized steel; Curved profile type C-275 for doors up to 18’4” wide –22-gauge galvanized steel; Between 18’4” and 20’0” – 20-gauge galvanized steel

SAFETY DEVICES:

Built-in brake mechanism provides additional peace-of-mind against uncontrolled curtain travel.
Photoelectric safety sensors with guards - provide obstruction monitoring during door operation to help prevent injury and damage

OPERATION:

Direct drive integrated gear/motor/brake assembly; Drive assembly and limit sensors are factory pre-assembled;  Hand chain for power outage. Horsepower appropriate to door size/weight; 230 VAC 3-phase motor

BOTTOM BAR:

Two PowderGuard® Premium powder coated black angles (min. thickness 3/16”) with weatherstrip

HOOD:

24-gauge galvanized steel primed; motor and end cover provided

BRACKETS:

Min. ¼” hot rolled primed, PowderGuard® Premium powder coated black steel

DOOR ROLL:

Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; door does not require counterbalance device

GUIDES:

Three structural steel angles PowderGuard® Premium powder coated black; With high cycle UHMW wear strip

ACTUATOR:

Single open/close/stop push button station incorporated into control panel

WIND LOAD:

20 psf

WARRANTY:

36 month limited warranty coverage on door system

‍